Icom ID-5100E - Using a Reflector

47
4
D-STAR OPERATION
New2001 New2001
Reflector operation ■
Linking to a reflector (Continued) D
Touch “Link to Reflector.” t
Touch the reflector that you want to link to. y
(Example: “REF002AL”)
• The transceiver returns to the DR screen.
• “Link to Reector” and “REF002AL” are displayed in “TO.”
!0 Hold down [PTT] to link to the reflector.
• The LED1 on the microphone lights red.
D Using a reflector
Touch [DR]. q
Check whether or not “TO” is selected. w
• If “TO” is not selected, touch the “TO” eld.
Touch the “TO” field. e
• Opens the “TO SELECT” screen.
Touch “Reflector.” r
• Opens the “REFLECTOR” screen.
Touch “Use Reflector.” t
• The transceiver returns to the DR screen.
• “Use Reector” and “CQCQCQ” are displayed in “TO.”
Hold down [PTT] to transmit. y
• The LED1 on the microphone lights red.