Icom ID-5100E

New2001
8
1
PANEL DESCRIPTION
1
PANEL DESCRIPTION
o DC POWER SOCKET [DC 13.8V]
Connect 13.8 V DC power source through the supplied DC
power cable.
Microphone connector information D
12345678
Front panel view
PIN
No.
NAME DESCRIPTION SPECIFICATIONS
1 8 V +8 V DC output. Maximum 10 mA
2 MIC U/D Frequency Up/Down
UP: Ground
DN: Ground
through 470 ˘
3 M8V SW
HM-207 connection
Grounds when the
HM-207 is connected.
—
4 PTT PTT input
Ground for trans-
mission
5 MIC E Microphone ground —
6 MIC Microphone input —
7 GND PTT ground —
8 DATA IN
When the HM-207 is
connected, inputs HM-
207 data
—
■ Microphone (HM-207)
With the HM-207, you can input numbers for frequency or
Memory channel setting, and easily adjust the audio volume
or squelch level.
q
w
e
!0
t
y
i
u
o
r
!7
Mic element
!6
!1
!2
!3
!4
!5
q LED 1
Lights red while transmitting with [PTT].
w [∫]/[√] (UP/DOWN) KEYS
Push to change the operating frequency or Memory ➥
channel.
Hold down to continuously change the frequency or ➥
Memory channel.