Icom ID-5100E

9
1
PANEL DESCRIPTION
New2001 New2001
Microphone (HM-207) (Continued) ■
e [PTT] SWITCH
Hold down to transmit, release to receive.
r [VFO/MR•
] KEY
Push to toggle between the VFO and Memory modes. ➥
Hold down for 1 second to turn the Lock function ON ➥
or OFF. (p. 17)
t [HOME/CALL] KEY
Push to select the Home channel. ➥
Hold down for 1 second to turn the Call channel mode ➥
ON or OFF.
y [MAIN/DUAL] KEY
In the Single watch mode, push to toggle between the ➥
A and B bands.
In the Dualwatch mode, push to toggle between the ➥
MAIN and SUB bands.
Hold down for 1 second to toggle between the Dual- ➥
watch and Single watch modes.
u [F-1] KEY
Push to activate the preprogrammed function of the [F-1]
key.
(Default: During RX/Standby: [BAND/BANK]
During TX: [T-CALL])
[F-2] KEY
Push to activate the preprogrammed function of the [F-2]
key.
(Default: During RX/Standby: [Monitor]
During TX: [---])
You can assign a desired function in the Menu screen.
i [CLR] KEY
In the Menu screen or Quick Menu window, push to return
to the standby screen.
o [ENT] KEY
In the VFO mode, push to open the frequency entry ➥
window.
In the Memory mode, push to open the memory chan- ➥
nel number input window.
After the numeral input, push to set. ➥
q
w
e
!0
t
y
i
u
o
r
!7
Mic element
!6
!1
!2
!3
!4
!5