New2001
10
1
PANEL DESCRIPTION
1
PANEL DESCRIPTION
!0 LED 2
Lights green when transceiver’s power is ON.
!1 [VOL∫/A] KEY
Push to increase the audio output level. ➥
When entering a DTMF code, push to input ‘A.’ ➥
!2 [VOL√/B]KEY
Push to decrease the audio output level. ➥
When entering a DTMF code, push to input ‘B.’ ➥
!3 [SQL∫/C] KEY
Push to increase the squelch level. ➥
When entering a DTMF code, push to input ‘C.’ ➥
!4 [SQL√/D] KEY
Push to decrease the squelch level. ➥
When entering a DTMF code, push to input ‘D.’ ➥
!5 [#/CE] KEY
In the frequency entry screen, push to delete a num- ➥
ber.
When entering a DTMF code, push to input ‘#.’ ➥
!6 [M/.] KEY
In the frequency entry screen, push to input a ‘.’ (deci- ➥
mal point).
When entering a DTMF code, push to input ‘ ➥ M.’
!7 [0] to [9] KEYS
In the frequency entry window or while entering a DTMF
code, push to input ‘0’ through ‘9.’
D Setting frequency and Memory channel
[Example for frequency setting]
First, push [VFO/MR•
] to select the VFO mode.
To enter the 435.680 MHz frequency:
Push [4], [3], [5], [6], [8], [0], then [ENT]. ➥
To change the 435.680 MHz to 435.540 MHz:
Push [•], [5], [4], [0], then [ENT]. ➥
To enter the 433.000 MHz frequency:
Push [4], [3], [3], then [ENT]. ➥
[Example for Memory channel setting]
First, push [VFO/MR•
] to select the Memory mode.
To select the Memory channel ‘5’:
Push [5] then [ENT]. ➥
To Next Page
Loading...
