Icom ID-5100E

41
4
D-STAR OPERATION
New2001 New2001
■ Calling an individual station
You can make a call to an individual station when the station
call sign is selected in “TO” (Destination).
When you call an individual station call sign through a gate-
way, your call is automatically sent to the last repeater that
the station accessed. So, even if you don’t know where the
station is, you can make a call using call sign routing.
Set “FROM” (Access repeater)1.
Touch [DR]. q
Check whether or not “FROM” is selected. w
• If “FROM” is not selected, touch the “FROM” eld.
Touch the “FROM” field. e
• Opens the “FROM SELECT” screen.
Touch “Repeater List.” r
• Opens the “REPEATER GROUP” screen.
Touch the repeater group where your access repeater is t
listed. (Example: “11: Japan”)
Touch your access repeater. (Example: “Hirano”) y
• Returns to the DR screen, and the selected repeater name is
displayed in “FROM.”