Icom ID-5100E

New2001
40
4
D-STAR OPERATION
4
D-STAR OPERATION
Set “TO” (Destination)2.
Touch the “TO” field. u
• Check whether “TO” is selected.
Touch the “TO” field again. i
• Opens the “TO SELECT” screen.
Touch “Gateway CQ.” o
• Opens the “REPEATER GROUP” screen.
!0 Touch the repeater group where your desired destination
repeater is listed. (Example: “11: Japan”)
!1 Touch your destination repeater.
(Example: “Hamacho”)
• Returns to the DR screen, and the selected repeater name is
displayed in “TO.”
Hold down [PTT] to transmit3.
• The LED1 on the microphone lights red.
For your reference:
The Gateway CQ call is used to call any repeater, but you
can call a specific station by simply saying their call sign.