Icom ID-5100E - GPS Operation; Checking Your GPS Position

New2001
46
4
D-STAR OPERATION
4
D-STAR OPERATION
Touch “Link to Reflector.” t
Touch “Direct Input.” y
Touch [+] or [–] one or more times to select the reflector u
number. (Example: 010)
• Touch [] to cancel, and then return to the previous screen.
Touch [+] or [–] one or more times on the right-end box to i
select the module letter. (Example: B)
Touch [SET]. o
• The transceiver returns to the DR screen.
• “Link to Reector” and “REF010BL” are displayed in “TO.”
!0 Hold down [PTT] to link to the reflector.
• The LED1 on the microphone lights red.
Using the TX History
The TX History stores the up to 5 reflectors that your access
repeater linked before.
Example: Select the “REF002AL” in the TX History.
Touch [DR]. q
Check whether or not “TO” is selected. w
• If “TO” is not selected, touch the “TO” eld.
Touch the “TO” field. e
• Opens the “TO SELECT” screen.
Touch “Reflector.” r
• Opens the “REFLECTOR” screen.