63
7
MENU SCREEN
New2001 New2001
Scan Set scan options.
Pause Timer 2sec~10sec~20sec or HOLD Selects the scan pause time. When receiving signals,
the scan pauses according to the scan pause timer.
Resume Timer 0sec~2sec~5sec or HOLD
Selects the scan resume time from a pause after the
received signal disappears.
Temporary Skip Timer 5min, 10min or 15 min
Selects the Temporary Skip Time. When the time is
set, specified frequencies are skipped for this period
during a scan.
Program Skip OFF or ON Turns the Program Skip Scan function ON or OFF for
a VFO mode scan.
Bank Link
A:
✔
~Z:
✔
Selects banks to be scanned during a Bank Link
Scan.
Program Scan Edge 00~24 Sets the frequency ranges for the program scan.
Program Link
See the Full Manual for details of the preset values.
Sets the link function for the program scan edge
channels.
Voice Memo Set the TX/RX voice recording options.
QSO Recorder
<<REC Start>>*
Starts recording the received signal audio.
Play Files* PLAY FILES Plays or deletes the recorded audio.
Recorder Set
REC Mode TX&RX or RX Only Selects to record the TX audio or not.
RX REC Condition Always or Squelch Auto Selects whether or not the squelch status affects the
RX voice audio recording.
File Split OFF or ON Selects whether or not to automatically create a new
file if transmission and reception, or squelch status
(open and close) is switched.
Menu items and Default settings (Continued) ■
*
Be sure to insert the SD card into the transceiver before selecting these items.
To Next Page
Loading...
