Icom ID-5100E

69
7
MENU SCREEN
New2001 New2001
RX Treble Cut, Normal or Boost Sets the DV mode received audio treble filter level to
Cut, Normal or Boost.
RX Bass Boost OFF or ON Turns the DV mode received audio Bass Boost func-
tion ON or OFF
TX Bass Cut, Normal or Boost Sets the DV mode transmit audio bass filter level to
Cut, Normal or Boost.
TX Treble Cut, Normal or Boost Sets the DV mode transmit audio treble filter level to
Cut, Normal or Boost.
Auto Reply OFF, ON, Voice, Position (Main Only)
or Position (Main/Sub)
Selects the Automatic Reply function.
DV Data TX PTT or Auto Selects manually or automatically to transmit low
speed data.
DV Fast Data
The DV Fast Data function uses the data and the au-
dio frames to send data approximately 3.5 times faster
than the normal speed. So, no audio can be sent.
Fast Data OFF or ON Selects whether or not to use DV Fast data function
for data communication in the DV mode.
GPS Data Speed Slow or Fast Set the GPS data speed when the data is sent using
the DV Fast Data function.
TX Delay (PTT) 1sec~2sec~10sec or OFF Set the TX delay time after releasing [PTT] when the
“DV Data TX” item is set to “PTT” and data is sent
using the DV Fast data function.
Digital Monitor Auto, Digital or Analog Selects the DV mode RX monitoring when [SQL] is
held down.
Digital Repeater Set OFF or ON Turns the digital repeater setting function ON or OFF.
This function is usable in any DV mode except using
the DR function.
DV Auto Detect OFF or ON Turns the DV mode automatic detect function ON or
OFF.
Menu items and Default settings (Continued) ■