75
7
MENU SCREEN
New2001 New2001
Temperature ç, ƒ* Selects units to display the temperature.
Barometric hPa, mb, mmHg, inHg* Selects units to display the barometric pressure.
Rainfall mm, inch* Selects units to display the rainfall.
Wind Speed m/s, mph*, knots Selects units to display the wind speed.
Display Language English or Japanese Selects the display language in the DR screen or
Menu mode. When “English” is selected in System
Language, this setting will disappear.
System Language English or Japanese Selects English or Japanese as the system language
of the transceiver.
Sounds Sets the Sound options.
Beep Level 0~9 Sets the beep output level.
Key-Touch Beep OFF or ON Turns the confirmation beep tones when key is
pushed, ON or OFF.
Home CH Beep OFF or ON Turns the Home CH Beep ON or OFF.
Band Edge Beep OFF or ON Turns the Band edge beep ON or OFF.
Scan Stop Beep OFF or ON Turns the scan stop beep ON or OFF.
Standby Beep OFF, ON, ON (to me:High Tone) or
ON (to me:Alarm/High Tone)
Turns the standby beep function in the DV mode ON
or OFF.
Sub Band Mute (Main RX) OFF, Mute, Beep or Mute & Beep Selects to mute the SUB band audio signal while
receiving on the MAIN band, and/or sound a beep
when a signal disappears on the SUB band.
Sub Band Mute (TX) OFF or ON Select whether or not to mute the SUB band audio
signal while transmitting in the Dualwatch mode.
Scope AF Output OFF or ON Selects the audio output option during a sweep.
Menu items and Default settings (Continued) ■
* The default value may differ, depending on the transceiver version.
To Next Page
Loading...
