EasyManua.ls Logo

Icom IP100H - Product Specifications

Icom IP100H
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
FOR YOUR REFERENCE
7-3
Specifications
D IP100H
• Power supply requirement:
Icom BP-271, BP-272 battery pack or
BP-273 battery case
• Current drain:
Less than 150 mA average
( Tx: 100 mA, Rx: 150 mA,
standby: 50 mA)
Usable temperature range:
10°C to +60°C (+14°F to +140°F)
• Dimensions: 58(W) × 95(H) × 26.4(D) mm
(2.3(W) × 3.7(H) × 1.0(D) inches)
(projections are not included)
Weight: Approximately 205 g (7.2 oz)
(with antenna and BP-271)
• Wireless LAN standard:
IEEE802.11 n/a/b/g
Authentication and Encryption:
WEP (64/128 bit),
WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
Protocol: TCP/IP
• Audio codec: G.711 μ-law (64 kbps)
• Audio output power:
Internal speaker
More than 400 mW
(at 10% distortion into a 16 Ω load)
External speaker
More than 200mW
(at 10% distortion into an 8 Ω load)
• Audio output impedance:
Internal speaker
16 Ω
External speaker
8 Ω
D BC-202
desktop charger
• Power supply requirement:
12 to 16 V DC or the specified Icom
power adapter
Charging temperature range:
C to +4C (+32˚F to +104˚F)
Weight: Approximately 104 g; 3.7 oz
(without power adapter)
Dimensions: 88(W) × 72.6(H) × 46.5(D) mm
(3.5(W) × 2.9(H) × 1.8(D) inches)
(projections are not included)
D BC-211
multi-charger
• Power supply requirement:
12 to 16 V DC or the specified Icom
power adapter
Charging temperature range:
1C to +40˚C (+50˚F to +104˚F)
Weight: Approximately 1200 g; 2.6 lb
(without power adapter)
• Dimensions: 303.2(W) × 78.2(H) × 179.7(D) mm
(11.9(W) × 3.1(D) × 7.1(H) inches)
(projections are not included)

Table of Contents

Other manuals for Icom IP100H

Related product manuals