To Next Page

To Previous Page

⦁ Maximum Sequential Digits: The maximum number of sequential digits (options between 2-4) that will be

permitted or generated for PINs. For example, selecting 4 will allow a numerical sequence of 1234 or 4321 but

not 12345. Selecting <not set> will allow a numerical sequence of more than 4 digits, for example 12345.

⦁ Maximum Repetitive Digits: The maximum repetitive digits (options between 2-4) allowed for a user PIN.

Selecting <not set> allows more than 4 repetitive digits, for example 11111.

⦁ PIN Expiry Time: The frequency at which users will be prompted to reset their PIN at a keypad.

NOTE: When PIN expiry is enabled, regardless of the expiry time, ANY PIN created or edited through the user

Interface will immediately expire on first use. The user will be required to set their own permanent PIN when

next logging in at a keypad. This ensures that only the user knows their PIN.

Protege WX Integrated System Controller | Configuration Guide 31

Other manuals for ICT Protege WX

Questions and Answers:

Need help?

Do you have a question about the ICT Protege WX and is the answer not in the manual?

General