INSTALLATION
Ideal Logic Code Combi - Installation and Servicing
25
CONNECTING THE FLUE TO THE BOILER
Notes.
• Before tting the ue turret ll the condensate
trap within the boiler by pouring a cupful of
water into the ue outlet. Take care to ensure
that the water is only poured into the ue outlet,
and does not spill into the boiler casing.
• During assembly check that ue seals do not
become dislodged.
1.
2.
3.
through and pull back to seal against
4.
5. Engage the clamp in its slide
mechanism and push it horizontally
backwards
6. Fit the previously removed screw
Note - Flues over 1 metre long
It is recommended that a support
extension pipe used and a bracket
should be used at every joint, to ensure
To Next Page
Loading...
