SERVICING
Ideal Logic Code Combi - Installation and Servicing
11
76
BOILER SEALING PANEL SEAL REPLACEMENT
77
RECUPERATOR REPLACEMENT & CLEANING
1.
2. Remove the old seal from the casing and thoroughly
3. Fit the new seal, ensuring the bottom joint provides
4.
5.
Note. Ensure that the boiler front panel is correctly
sealed, compressing the seal to make an airtight joint.
1.
2.
3. Undo the two screws and remove the sump cover
4.
and remove manifold
5.
6.
7.
8. Undo the 4 screws retaining the recuperator
assembly to the underside on the boiler top panel
9.
10. Remove the C clips from the recuperator pipes and
disconnect
11.
12. Reconnect the DHW pipes to the recuperator ensuring
13.
14. Reassemble the boiler in reverse order
15.
16.
CLEANING
recuperator by pouring water
ensuring the full area is
Re-assemble the boiler in
7
10
SERVICING
206279-1.indd 52 06/01/2011 09:10:49
To Next Page
Loading...
