Ideal Boilers LOGIC Code Combi 26 - Assembling the Roof Flue Kit

27
INSTALLATION
Ideal Logic Code Combi - Installation and Servicing

29 ASSEMBLING THE ROOF FLUE KIT


from the top of the boiler, it is necessary to cut both pipes of
assembly A, then ensure they are cut equally leaving the inner


1. 

nm8739
min 16
o
max 41
o
MAX LENGTH:
7.5m
BOILER
nm8740
Flue Terminal
Pitched roof tile
weather collar
Flat roof tile
weather collar
1
3G9557b
'X'
6
2. Fit the vertical connector (supplied separately) in accordance
with the in the instructions provided with the vertical connector

3. 

4. Engage the clamp in its slide mechanism and push it horizontally

5. 

6. 


Note. Check the position of the inner ue duct relative to the outer duct on the
assembled extension duct(s) and ensure the terminal ue duct is cut longer than the
air duct to ensure engagement in the nal ue duct seal.
7. 
ASSEMBLY A
2
Extension
Duct
Vertical
connector
5
4
206279-10272
206279-1.indd 27 06/01/2011 09:10:16