SERVICING
Ideal Logic Code Combi - Installation and Servicing
54
IGNITION ELECTRODE REPLACEMENT
1.
2.
3.
4.
5. Remove the 2 screws holding the ignition
6.
7. Fit the new ignition electrode, using the new
8.
9.
53
CONTROL THERMISTOR & RETURN THERMISTOR RENEWAL
1.
2.
3. Unclip the return thermistor from the return pipe and withdraw it from the
4.
5. Reconnect the electrical leads to the new thermistors and reassemble in
6.
2
3
Ignition Electrode
To Next Page
Loading...
