INSTALLATION
Ideal Logic Code Combi - Installation and Servicing
35
EXTERNAL ELECTRICAL CONTROLS
Wiring External to the Boiler
Frost Protection
If parts of the pipework run outside the house or if the boiler will be left off
for more than a day or so then a frost thermostat should be wired into the
Note If the boiler is installed in a garage it may be necessary to t a pipe
thermostat, preferably on the return pipework.
34
REPLACING PRE-FITTED MAINS CABLE
1.
2.
3.
4.
5.
6. Route replacement cable back through the cable clamp and grommet and re-tighten
7.
mains electrical connections to the boiler it is important that the wires are prepared in
such a way that the earth conductor is longer than the current carrying conductors,
such that if the cord anchorage should slip, the current carrying conductors become
8.
5
4
33
INTERNAL WIRING
INSTALLATION
206279-1.indd 30 06/01/2011 09:10:19
To Next Page
Loading...
