LanTEK III 161809 Iss 2
User Manual Page14
Controls Description
9 Hazard LED
Excessive line voltage (TELCO): Excessive
voltage at measurement input.
10 S/W-LCD Display Two line alphanumeric display
11 On LED The Remote Handset is on.
12 Fail LED Test result: Fail.
Fig. 6 The Remote Handset (RH) Rear and side view
Ports/Connectors Description
13 Low-NEXT-Connector Connect a test adapter.
14 Service and Maintenance Jack Connection for service and maintenance work.
15 USB Device Connect to a computer for firmware updates.
16 Talkset Jack Connect a Talkset.
17 DC Input Jack
Connect an external power supply and charge
battery pack.
To Next Page
Loading...
