IDEAL Networks LanTEK III - Labeling Standard TIA;EIA 606-A

LanTEK III 161809 Iss 2
User Manual Page35
Examples for Default Cable ID
In default setting, the meter starts at 0000 and ends at 9999. The four (4) positions are
enabled and incrementing.
Default Example 1 Example 2 Example 3
"Cable From" "Cable To"
Cable name:
TEST
Current: 0 0 0 0
Start: 0 0 0 0
End: 9 9 9 9
Cable name:
PANEL 1
Current: 0 0 0 0
Start: 0 0 0 0
End: 0 0 2 2
Cable name:
PANEL 2
Current: 0 1 8 A
Start: 0 0 0 A
End: 0 9 9 D
Cable name:
OFFICE 2
Current: 0 0 0 0
Start: 0 0 0 0
End: 9 9 9 9
Cable name:
Distributor
Current:0 0 0 A
Start: 0 0 0 A
End: 0 0 9 D
0 0 0 0 0 0 0 0 0 1 8 A 0 0 0 0 0 0 0 A
0 0 0 1 0 0 0 1 0 1 8 B 0 0 0 1 0 0 0 B
0 0 0 2 0 0 0 2 0 1 8 C 0 0 0 2 0 0 0 C
0 0 0 3 0 0 1 0 0 1 8 D 0 0 0 3 0 0 0 D
0 0 0 4 0 0 1 1 0 1 9 A 0 0 0 4 0 0 1 A
0 0 0 5 0 0 1 2 0 1 9 B 0 0 0 5 0 0 1 B
0 0 0 6 0 0 2 0 0 1 9 C 0 0 0 6 0 0 1 C
0 0 0 7 0 0 2 1 0 1 9 D 0 0 0 7 0 0 1 D
0 0 0 8 0 0 2 2 0 2 0 A 0 0 0 8 0 0 2 A
0 0 0 9 0 0 0 0 0 2 0 B 0 0 0 9 0 0 2 B
0 0 1 0 0 0 0 1 0 2 0 C 0 0 1 0 0 0 2 C
0 0 1 1 0 0 0 2 0 2 0 D 0 0 1 1 0 0 2 D
0 0 1 2 0 0 1 0 0 2 1 A 0 0 1 2 0 0 3 A
5.4 Labeling Standard TIA/EIA 606-A
The standards TIA/EIA 606-A for telecommunication infrastructure include the following
elements:
• Horizontal cable arrangements and cabling.
• Backbone cable arrangements and cabling.
• Grounding/potential equalization for telecommunication systems.
• Rooms (e.g. service connection room, telecommunication room, equipment Room
and fire protection installations.)
The mentioned standards affect the administration of telecommunication infrastructure by:
• Assigning identifiers to infrastructure components.
• Specifying information elements on which the infrastructure is based.
• Specifying the relation between these records to ensure the contents.
• Specifying reports that contain information on record groups and
• Specifying the requirements on graphs and symbols.