IDEAL Networks LanTEK III - Autotest Results and Graphs

LanTEK III 161809 Iss 2
User Manual Page55
5.12 Autotest Results and Graphs
The Autotest results can be displayed as table or graph.
1. Open "File" on start screen.
2. Use Arrow Keys to navigate to the desired job folder. The display is highlighted
yellow.
3. Use Arrow Keys to navigate to desired single test. The display is highlighted
yellow.
4. Press Enter to display overview of single tests.
Fig. 65 Single test overview
5. Press Enter again to open test series of single test.
Fig. 66 Test series
6. Use Arrow Keys to navigate to desired test series and press Enter to display
result table.
Fig. 67 Result Table