IDEAL Networks LanTEK III - Restore Default; Clear Memory

LanTEK III 161809 Iss 2
User Manual Page24
4.9 Restore Default
Use this menu to reset all tester settings to their factory defaults. Using this option will not
delete stored tests.
1. Use Arrow Keys to navigate to "Restore Defaults" menu and press Enter.
Fig. 18 Restore Defaults
2. Use the soft key to accept default settings.
3. Use the soft key to exit the screen without making changes.
4.10 Clear Memory
Use this menu to clear all records from the tester memory at one time.
CAUTION!
When using the "Clear Memory" menu, the records cannot be restored. This will permanently delete
all stored tests.
1. Use Arrow Keys to navigate to Clear Memory menu and press Enter.
Fig. 19 Clear Memory
2. Use the soft key to clear the memory of the Cable Certifier.
3. Use the soft key to exit the screen without making changes.