IDEAL Networks LanTEK III - Select Twisted Pair Cabling

LanTEK III 161809 Iss 2
User Manual Page38
AAA A / AAA A - 00 . 000
Floor Telecom room Floor Telecom room Port Pair
2. Use Left/Right Arrow Keys to navigate to desired position in Pair area. Use
Up/Down Arrow Keys
to assign characters and numbers.
3. Proceed in the same manner with positions Port, Telecom Room, and Floor.
4. Proceed in the same manner with positions Telecom Room and Floor.
5. Use soft key to hide individual positions. Assembling the cable line
automatically generates the 606A-Name.
6. Press Enter to save the information entered. Escape allows you to exit the menu
without making changes.
5.5 Select Twisted Pair Cabling
1. Open "Cable Type" on start screen.
2. Use Arrow Keys to navigate to installation type of cable line to be tested
(Twisted Pair Perm, Twisted Pair Basic or Twisted Pair Channel) and confirm with
Enter.
Fig. 38 Cable Type
3. Use Arrow Keys to navigate to desired cable type.
Fig. 39 Example Twisted Pair Perm
4. Press Enter to save the information entered. Escape allows you to exit the menu
without making changes.
Or