The name used last will appear:
• Single Cable ID (1 name is assigned to each cable).
or
• Double Cable ID (2 names are assigned to each cable, one for the start and one
for the end of the cable).
Fig. 29 Cable ID
• Increment… when pressing Enter, the current value of the test meter, shown in
view below, is incremented by one position.
• Set… opens menu for cable name.
• Select… switches between Single Cable ID and Double Cable ID.
5.3.1 Simple Cable ID
1. Use Arrow keys to navigate in "Cable ID" view to option Set… and press Enter.
Single Cable ID (1 cable name)
2. Use Alphanumeric Keys to enter a Cable Name for the test portion.
3. Use Alphanumeric Keys to reset the Current Value of the test meter, or enter an
arbitrary value.
4. Make corrections to entries by using the soft keys (delete at cursor
position), (delete characters to the left of cursor), /
(insert alphanumeric characters at cursor position / overwrite highlighted entry).
To Next Page
Loading...
