IDEAL Networks LanTEK III - Set Cable Name (cable ID)

LanTEK III 161809 Iss 2
User Manual Page30
2. Use Arrow Keys to navigate to option New Job and press Enter.
Fig. 26 Job Options
3. Use
Alphanumeric Keys
to enter the desired information.
Fig. 27 New Job
4. Make corrections to entries by using the soft keys (delete at cursor
position), (delete characters to the left of cursor), /
(insert alphanumeric characters at cursor position / overwrite highlighted entry).
5. Press Enter to save the information entered. Escape allows you to exit the menu
without making changes.
6. When confirming with Enter, the name of the new job folder will appear on the
ready screen.
5.3 Set Cable Name (cable ID)
The cable name of the cable lines in an Autotest consists of a fixed Cable Name and a
variable Current Value (4-digit test meter) that automatically increments. Depending on
selected Autotest Pref it is also possible to specify structure and way of counting.
1. Use Arrow keys to navigate to "Cable ID" and press Enter.