IDEAL Networks LanTEK III - Specify Cable Type; Create Cable Type

LanTEK III 161809 Iss 2
User Manual Page39
5. Use available soft key options to specify a cable type, create a cable type, edit
NVP values or enter reference temperature.
5.5.1 Specify Cable Type
1. Use soft key to open select menu to specify the selected cable type.
2. Use Arrow keys to navigate to desired specification and confirm with Enter.
Fig. 40 Specification of Cable Type
3. Press Enter to save the information entered. Escape allows you to exit the menu
without making changes.
5.5.2 Create Cable Type
1. Use soft key to open select menu for individual creation of a cable
type.
2. Use Arrow keys in Select Menu to navigate to option Frequency Range and
confirm with Enter.
Fig. 41 Select Menu
3. Use Arrow Keys to navigate to the individual boxes and use Alphanumeric Keys
to assign start and stop frequencies for Certification and Performance Range.