IDEAL Networks LanTEK III - Measurement Units

LanTEK III 161809 Iss 2
User Manual Page22
4. Press Enter to save the information entered. Press Escape to exit the menu without
making changes
4.6 Measurement Units
Use this menu to specify the measurement unit for length measurements ft or m (foot or
meter). The default setting depends on the language selected.
1. Use Arrow Keys to navigate to "Measurement Units" menu and press Enter.
Fig. 15 Measurement Units
2. Use soft key / (foot / meter) to select the desired unit.
3. Press Enter to save the information entered. Press Escape to exit the menu without
making changes.
4.7 Talkset
Use this menu to set signal strength of tone generator, volume of internal speaker and
volume of talkset. Also use this menu to change the talkset mode.
1. Use Arrow Keys to navigate to "Talkset" menu and press Enter.
Fig. 16 Talkset
2. Use Arrow Keys to select the desired option.