LanTEK III 161809 Iss 2
User Manual Page47
6. Connect a cable of known length.
7. Use Arrow Keys and Number Keys to enter known cable length.
8. For automatic calculation of a new NVP, press . After calculation of new
NVP, the display returns to the NVP main screen.
This concerns a channel measurement. When entering the cable length, the length of both
patch cords must be considered.
5.8 Coaxial Cable Standards
The LanTEK
®
III Cable Tester supports the following coaxial cable standards:
CATV standards Ethernet standards Other cable types
RG59 31 or 92 m
(3-fold or 4-fold shield)
10Base 2 IBM Coax
RG6 31 or 92 m
(3-fold or 4-fold shield)
10Base 5 TWINAXIAL
ARCNET
1. Open "Cable Type" on start screen.
2. Use Arrow Keys to navigate to option
Ethernet and confirm with Enter.
Fig. 56 Ethernet
3. Use Arrow Keys to navigate to desired cable type and confirm with Enter.
To Next Page
Loading...
