IDEAL Networks LanTEK III - Select Custom Cable Type

LanTEK III 161809 Iss 2
User Manual Page69
Fig. 88 Menu Selection Test Standards
4. Use Arrow Keys
to navigate to Custom Name/NVP and confirm with Enter.
Fig. 89 Custom Name/NVP
5. Assign a name for the newly created custom cable The soft key
appears.
6. Use Alphanumeric Keys to enter one or several NVP values, if required.
7. Use
soft key
to accept changes and return to screen to create a
custom cable.
6.18.2 Select Custom Cable Type
The custom cable type can be edited at any time or selected as current cable type.
1. Open "Cable Type" on start screen.
2. Use Arrow Keys to navigate to Custom Cable and confirm with Enter.
3. Use Arrow Keys to navigate to desired custom cable type and confirm with
Enter.