Fig. 11 User Information
2. Use Arrow Keys to navigate to desired option Name, Company or Contractor.
3. Use Alphanumeric Keys to enter the desired information.
4. Make corrections to entries by using the soft keys (delete at cursor
position), (delete characters to the left of cursor), /
(insert alphanumeric characters at cursor position / overwrite highlighted entry).
5. Press Enter to save the information entered. Press Escape to exit the menu without
making changes.
4.3 Autotest Options
Use this menu to set Autotest options.
1. Use Arrow Keys to navigate to "Autotest Options" menu and press Enter.
Fig. 12 Autotest Options
2. Use Arrow keys to select the desired option.
3. Use soft key to activate or deactivate the selected option. An activated
option is indicated by the green box.
4. Press Enter to save the information entered. Press Escape to exit the menu without
making changes.
To Next Page
Loading...
