EasyManua.ls Logo

IDEAL EVOMAX 2 30 - Page 38

IDEAL EVOMAX 2
 30
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Two Heating Circuits:
The system will now scan the known
devices on the bus to determine what
DHW circuits are available in the boiler
for conguration:
Once this is completed, the display will
prompt with the available DHW circuits so
that they may have DHW circuit numbers
allocated, and then later congured.
If any DHW circuits are required for the
boiler then number them sequentially
from 1. If there are no DHW circuits to be
congured to this boiler just move on past
by selecting 'Done'. Example:
The system will now congure the System
Manager for these circuits.
The system will now scan the known
devices on the bus to determine what
Plant functions are available in the boiler
for conguration:
If you wish to congure any of the
following plant functions, then select 'Yes',
if not continue by selecting 'No' and move
past this Section. ONLY congure these
functions here if you are not going to use
them in any HC's or DHW circuits.
Hydraulic Separation:
If the boiler has Hydraulic Separation
from the intermediate or nal circuits in
the heating system then set this Option
to ‘Yes’:
System Pump:
If the boiler has a Plant System Pump
connected then select the output that is
used to control it from the list. Otherwise
select ‘None’.
Once an output has been congured the
selected function is shown in brackets
behind the output name.
Set HC number
HC 01 Boiler 1.1
HC ## Boiler 1.2
Done
Set HC number
HC 01 Boiler 1.1
HC 02 Boiler 1.2
Done
Set HC number
HC 02 Boiler 1.2
Done
Set DHW number
DHW ## Boiler 1
Done
Congure plant?
No
Yes
Do you have hydraulic separation?
No
Yes
Congure plant?
No
Yes
Do you have hydraulic separation?
No
Yes
Set DHW number
DHW 01 Boiler 1
Done
Set DHW number
DHW 01 Boiler 1
Done
Do you have a system pump?
None
PWM/0-10V ()
MFR1
None
PWM/0-10V ()
MFR1 ()
MFR2 ()
Do you have a system pump?
PWM/0-10V ()
MFR1 ()
MFR2 ()
MFR3 ()
Do you have a system pump?
MFR2 ()
MFR3 ()
MFR4 ()
Do you have a system pump?
MFR1
MFR2 ()
MFR3 ()
MFR4 ()
Do you have a system pump?
MFR3 ()
MFR4 ()
38
Installation & Servicing
SECTION 2 - INSTALLATION
INSTALLATION

Table of Contents

Other manuals for IDEAL EVOMAX 2 30

Related product manuals