EasyManua.ls Logo

IDEAL EVOMAX 2 30 - Page 43

IDEAL EVOMAX 2
 30
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Heating Circuit Conguration:
Heating circuit selection for conguration.
Select the HC from the available heating
circuits in the list:
HC pump location. If the HC has an
individual HC Pump connected then
select the output that is used to control it
from the list. Otherwise select ‘None’.
Once an output has been congured the
selected function is shown in brackets
behind the output name:
Example, MFR1 as a HC pump:
The HC maximum temperature set-point
can be set, it defaults to the maximum
output of the boiler model, but this can be
decreased:
The HC minimum set-point can be set,
it defaults to the minimum output of the
boiler model, but this can be increased:
Room Sensor. If the HC has a Room
Sensor connected then select 'Yes' from
the list. Otherwise set to 'None'.
Outside Sensor. If the HC has a specic
Outside Sensor connected then select
'Yes' from the list. Otherwise set to
'None'.
Control variant. The HC must have a
control variant that is used to determine
the demand. This is usually set to Flow
Temperature unless specic conguration
options are chosen.
Switched Live 1 input function. The SL1
input can be congured as a HC function,
if this is not required select 'None'.
Select loc'n of HC pump
None
PWM/0-10V ()
MFR1 ()
Select HC to congure
HC1 Boiler1.1
Done
Select loc'n of HC pump
None
PWM/0-10V ()
MFR1 ()
MFR2 ()
Select loc'n of HC pump
PWM/0-10V ()
MFR1 ()
MFR2 ()
MFR3 ()
Select loc'n of HC pump
MFR1 ()
MFR2 ()
MFR3 ()
MFR4 ()
Select loc'n of HC pump
PWM/0-10V ()
MFR1 (HC1 pump)
MFR2 ()
MFR3 ()
Select loc'n of HC pump
MFR2 ()
MFR3 ()
MFR4 ()
Select loc'n of HC pump
MFR3 ()
MFR4 ()
Set max ow temp
80
º
C
Done
Set min ow temp
15
º
C
Done
Set max ow temp
80
º
C
Done
Set min ow temp
15
º
C
Done
Room sensor available?
None
Yes
Outside sensor available?
None
Yes
Room sensor available?
None
Yes
Outside sensor available?
None
Yes
Control Variant
Flow
Weather
Room
Control Variant
Flow
Weather
Room
Weather and Room
Control Variant
Weather
Room
Weather and Room
Control Variant
Room
Weather and Room
Congure SL1
None
HC enable
Override
Congure SL1
None
HC enable
Override
Holiday
Congure SL1
HC enable
Override
Holiday
Frost
Congure SL1
Override
Holiday
Frost
Congure SL1
Holiday
Frost
43
Installation & Servicing
SECTION 2 - INSTALLATION
INSTALLATION

Table of Contents

Other manuals for IDEAL EVOMAX 2 30

Related product manuals