IDEAL EVOMAX 2 30 - Page 47

The DHW circuit has now been
congured and the display will return to:
Note, that the DHW circuit number now
has a tick next to it showing that it has
been congured. If you have completed
the DHW circuit conguration, select
'Done':
The system will now reboot:
The boiler conguration is now complete
and the display will show the boiler status
screen:
IDEAL Evomax 2 120kW
Operation: Off
Flow temp: 0.0ºC
Flow temp: 37.5ºC
Select DHW to congure
DHW1 Boiler1 ü
Done
Select DHW to congure
DHW1 Boiler 1 ü
Done
System will reboot
Loading system table
47
Installation & Servicing
SECTION 2 - INSTALLATION
INSTALLATION