51
gas CONTROL VaLVE REpLaCEMENT
1.
2. Unplug the electrical lead connection from the
3. Undo the union nut on the outlet of the gas
4. Undo the gas inlet pipe union at the inlet to the
5.
6. Fit the new gas control valve ensuring the two
sealing washers are in place and reconnect gas
7.
52
DIVERTER VaLVE aCTUa TOR REpLaCEMENT
1.
2.
3. Using a suitable tool pull out the retaining
clip and lift the diverter head from the brass
4. Fit new actuator head and reassemble in
6.
2
4
5
3
Diverter Valve Actuator
Retaining Clip
sERVICINg
To Next Page
Loading...
