IDEC MICROSmart FC6A Series User Manual

FC6A S ERIES MICROS MART U SER ’ S M ANUAL FC9Y-B1722 7-35
7: HMI F UNCTION
Monitoring the FC6A Series MICROSmart Status
You can check the FC6A Series MICROSmart system software version, scan time, protection status, CPU network settings, and HMI
network settings.
1. On the standard screen, press the (ESC) + (OK) buttons.
The system menu is displayed.
2. Select Status Monitor with the (up) and (down) buttons and press the (OK) button.
3. The system version is displayed. Press the (down) button.
4. The scan time is displayed. Press the (down) button.
5. The upload protection status is displayed. Press the (down) button.
6. The download protection status is displayed. Press the (down) button.
7. CPU Network Settings 1 is displayed. Press the (down) button.
8. CPU Network Settings 2 is displayed. Press the (down) button.
Running
13:30:40
2015/DEC/01/TUE
Stopped
2015/DEC/01/TUE
13:30:40
When the user program is stopped
When the user program is running
Stop
External Memory
Device Monitor
Status Monitor
External Memory
Configurations
Device Monitor
Status Monitor
When the user program is stopped
When the user program is running
System Version:
1.00
Run/Stop Status:
Running
System Version:
1.00
Run/Stop Status:
Stopped
When the user program is stopped
When the user program is running
Scan Time:
Current
㸸ࠉ
2 ms
Maximum
㸸ࠉ
4 ms
Minimum
㸸ࠉ
2 ms
Protection Status:
Read Program:
None
Write Program:
None
Setting: Fixed
IP Address
192.168. 1. 6
CPU Network Settings
Subnet Mask
㸸
255.255.254. 0
CPU Network Settings 2

IDEC MICROSmart FC6A Series Specifications

General

Brand	IDEC
Model	MICROSmart FC6A Series
Category	Computer Hardware
Language	English