IDEC MICROSmart FC6A Series User Manual

FC6A S ERIES MICROS MART U SER ’ S M ANUAL FC9Y-B1722 9-3
9: A NALOG I/O M ODULES
Precautions When Using the Product
Do not use an analog I/O module with hardware version number V200 in combination with the system software for analog I/O
modules version 1.01 or lower. The operation mode of the analog I/O module will be indefinite and analog input values cannot be
acquired correctly.
System software version 1.02 is written to V200 analog I/O modules when they are shipped from the factory. Do not download
system software version 1.00 or 1.01 to these analog I/O modules.
If system software version 1.01 or lower is written to a V200 analog I/O module, download the system software for analog I/O
modules version 1.02 included with WindLDR Ver. 8.6.1 or higher to the analog I/O module again.
System Software Version
Hardware Version Number Version 1.01 or Lower Version 1.02 or Higher
Lower than V200 Yes Yes
V200 or Higher No Yes

IDEC MICROSmart FC6A Series Specifications

General

Brand	IDEC
Model	MICROSmart FC6A Series
Category	Computer Hardware
Language	English