IDEC MICROSmart FC6A Series User Manual

11: SD M EMORY C ARD
11-32 FC6A S ERIES MICROS MART U SER ’ S M ANUAL FC9Y-B1722
7. Click OK.
The Browse For Folder dialog box is displayed.
8. Select the drive where the SD memory card is inserted and then click OK.
The \FCDATA01\ folder is created on the SD memory card. The autoexec.ini file is saved directly under the \FCDATA01\ folder. If
a ZLD file is created from the current project, the ZLD file is saved to the \FCDATA01\PROGRAM\ folder.
This concludes creating an autoexec.ini file.
Note: A standalone ZLD file can be created and edited using WindLDR. For details, see “Creating a ZLD File Using WindLDR” on page 11-33

IDEC MICROSmart FC6A Series Specifications

General

Brand	IDEC
Model	MICROSmart FC6A Series
Category	Computer Hardware
Language	English