1 / Introduction 9
1.1 > MorphoWave Compact terminal 10
1.2 > Scope of the document 11
1.3 > Safety Instructions 12
1.4 > Wiring Recommendations 13
1.5 > Regulatory, safety and Environmental notices 14
1.5.1 > European Union (CE) regulatory notices 14
1.5.2 > USA (FCC) regulatory notices 15
1.5.3 > Canada (IC) regulatory notices 16
1.6 > Others recommendations 17
1.7 > Recommendations for terminal implementation 18
2 / General description 21
2.1 > Box opening 22
2.2 > Components of the initial package 23
2.3 > Terminal's front view description 24
2.4 > Terminal's rear view description 25
2.5 > MorphoWave Compact Technical Characteristics 26
3 / Installation procedure 29
3.1 > Before proceeding to the installation 30
3.2 > Installation 31
3.3 > Step by step procedure 32
3.3.1 > Drill the mounting holes 33
3.3.2 > Make the connections 34
3.3.3 > Attach the base plate on the wall 36
3.3.4 > Attach the device on the base plate 37
3.3.5 > Connect the connector assembly on the device 38
3.3.6 > Close the device on the base plate 39
4 / Electrical interface 41
4.1 > Wiring overview 42
4.2 > Power Supply 43
4.3 > Output Relay 45
4.4 > Tamper Switch 46
4.5 > Wiegand wiring 47
4.6 > Wiegand output 48
To Next Page
