EasyManua.ls Logo

Identiv uTrust 4711F - Software Architecture

Identiv uTrust 4711F
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Document Version 1.2
Last revised on
2017-09-26
Page 18 of 92
Reference Manual for uTrust 4701F and uTrust 4711F Readers
4.1.2. Software architecture
Applications can interface with the driver directly through the PC/SC interface.
uTrust 47x1 F
Reader
ICC
PICC
SLOT 0 SLOT 1
FIRMWARE
LAYER
T= 0 / T= 1 T = CL
Driver
- Contactless Card
Reader
PC/SC Layer
Contact Reader
Contactless
Reader
Driver
- Contact Smart Card
Reader
The uTrust 47xx F leverages a PC/SC CCID driver that is freely available for all supported operating
systems (Windows, macOS X and Linux). With current Windows versions (starting with Windows Vista)
and macOS X, this driver is already included in the basic installation.
With the diverse Linux derivatives, there may be distribution specific drivers that should get installed
using the install mechanism of the used distribution.
If there is none, the driver may always be downloaded from the webpage of the maintainer, Ludovic
Rousseau, https://alioth.debian.org/frs/?group_id=30105.
Additionally, Identiv provides a proprietary driver for all the supported OSs.

Table of Contents

Related product manuals