Identiv uTrust 4711F - Reader_Getmode; Reader_Get_Ifdtype

Document Version 1.2
Last revised on
2017-09-26
Page 49 of 92
Reference Manual for uTrust 4701F and uTrust 4711F Readers
6.3.3.2. READER_GETMODE
This Escape command retrieves the current mode of the reader.
Input:
The input buffer contains the escape code value.
Byte0
Escape code(0x02)
Output:
The currently active reader mode will be returned as a byte value
Mode
Value
Remarks
ISO
0x00
ISO 7816 mode
EMV
0x01
EMV mode
Synchronous
0x02
Memory card mode (synchronous)
NFC Test
0x04
NFC Test Mode
6.3.3.3. READER_GET_IFDTYPE
This Escape command is used to get the current IFD type from the reader.
Input:
The first byte of the input buffer contains the escape code.
Byte0
Escape code(0x12)
Output:
The reader returns its PID LSB first.
PID value
Description
B0
B1
0x26
0x57
Identiv uTrust 4701 F Dual Interface Reader
0x25
0x57
Identiv uTrust 4711 F Contactless + SAM Reader
0x10
0x57
Identiv uTrust 2700 F Smart Card Reader
0x50
0x57
Identiv uTrust 2910 F Smart Card Keyboard Reader