Identiv uTrust 4711F - Usb; Contact Card Interface; Contactless Interface

Document Version 1.2
Last revised on
2017-09-26
Page 21 of 92
Reference Manual for uTrust 4701F and uTrust 4711F Readers
4.2.3.2. USB
Parameter
Value/Description
DC characteristics
High bus powered (uTrust 47xx F draws power from USB bus)
Voltage: 5V
Avg.. Current : 110mA (RF on, no cards present)
Suspend Current: 400µA
USB specification
USB 2.0 FS Device
USB Speed
Full Speed Device (12Mbit/s)
Device Class
CCID
PID
0x5724 for uTrust 4701 F; 0x5725 for uTrust 4711 F
VID
0x04E6
4.2.3.3. Contact card interface
Parameter
Value/Description
Smart card operating
frequency
up to 12MHz
Maximum supported
card baud-rate
600Kbps
Cards supported
ISO/IEC 7816 smart cards - Class A, B and C
Synchronous smart cards
ISO-7816 compliant
Yes
CT-API compliant
Yes
Number of slots
Single smart card slot
Ejection mechanism
Manual
4.2.3.4. Contactless interface
Parameter
Value/Description
RF carrier frequency
13.56MHz +/-50ppm
Maximum supported
card baud-rate
848Kbps
Cards supported
● MIFARE: Classic 1K and 4K, DESFire, DESFire EV1,
Ultralight, Ultralight C, MIFARE mini and MIFARE Plus
● FeliCa™ 212 and 424 Kbps support: FeliCa Standard/Lite
● NFC forum tag type 1, 2, 3, 4
● iCLASS UID support
● my-d move – SLE 66RxxP, my-d move NFC – SLE
66RxxPN, SLE 66RxxS, SLE 55RxxE
● NFC enabled Smart Phones and Tablets
3
ISO-14443A and B
compliant
Yes
Number of slots
1
Ejection mechanism
Manual
3
tested with available device during development & qualification phase