Identiv uTrust 4711F - Papdu_Mifare_Read_Sector; Papdu_Mifare_Read_Sector_Ex

Document Version 1.2
Last revised on
2017-09-26
Page 33 of 92
Reference Manual for uTrust 4701F and uTrust 4711F Readers
Example:
Load Key A unencrypted and authenticate for block 6 (sector 1, actually) with that key:
APDU: FF 82 00 60 06 FF FF FF FF FF FF
SW12: 9000 (OK)
APDU: FF 86 00 00 05 01 00 06 60 01
SW12: 9000 (OK)
6.2.5. PAPDU_MIFARE_READ_SECTOR
This command reads the specified sector from a Mifare Classic card (first 3 blocks of the sector,
excluding the Key block) or the entire content of Mifare UL/UL C cards.
Command APDU:
Command
CLA
INS
P1
P2
P3
Data
Read Sector
FF
B1
Addr MSB
Addr LSB
0
-
Response APDU:
Data
Status Word
Mifare classic - 48 bytes of sector data read from card /
Mifare UL – Entire card data is returned (64 bytes)
SW1, SW2
Example:
Read sector 1 of a Mifare Classic 1K
APDU: FF B1 00 01 00
SW12: 9000 (OK)
DataOut: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
AA 55 AA 55 AA 55 AA 55 AA 55 AA 55 AA 55 AA 55 (48 bytes)
Read entire content of a Mifare UL:
APDU: FF B1 00 01 10
SW12: 9000 (OK)
DataOut: 04 6B 5D BA 09 F8 01 80 70 48 00 00 E1 10 06 00
00 01 02 03 1D 6E 6F 6B 69 61 2E 63 6F 6D 3A 62
74 01 00 11 67 9F 5F B6 04 06 80 30 30 30 30 00
00 00 00 00 00 00 00 00 00 00 00 02 42 54 FE 00 (64 bytes)
6.2.6. PAPDU_MIFARE_READ_SECTOR_EX
This command read the specified sector from a Mifare Classic card (all the 4 blocks of the sector,
including the Key block) or the entire content of Mifare UL/UL C cards.
Command APDU:
Command
CLA
INS
P1
P2
P3
Data
Read Sector Extended
FF
B3
Addr MSB
Addr LSB
0
-
Response APDU:
Data
Status Word
Mifare classic - 64 bytes of sector data read from card /
Mifare UL – Entire card data is returned (64 bytes)
SW1, SW2