Identiv uTrust 4711F - Papdu_Felica_Write_Blk; Papdu_Felica_Sys_Code

Document Version 1.2
Last revised on
2017-09-26
Page 39 of 92
Reference Manual for uTrust 4701F and uTrust 4711F Readers
6.2.17. PAPDU_FELICA_WRITE_BLK
This command issues a WRITE as defined in JIS 9.6.4
● P1 specifies the number of service
● P2 specifies the number of blocks
When an NFC Forum tag type 3 receives this command, it writes the records of the specified service.
Command APDU:
Command
CLA
INS
P1
P2
P3
Data
FeliCa Write
Block
0xFF
0x48
Number
of service
Number
of
blocks
2*(P1 + P2) +
(16 * P2)
Service Code
List, Block List,
Block Data
Response APDU:
Data
Status Word
8 bytes IDm + Status Flag 1 + Status Flag 2
SW1, SW2
6.2.18. PAPDU_FELICA_SYS_CODE
This command issues a REQ SYSTEM CODE as defined in RC-S850 / 860 Command-Ref-Manual Section
6.1.7
Command APDU:
Command
CLA
INS
P1
P2
P3
Data
FeliCa REQ SYSTEM CODE
FF
4A
00
00
00
-
Response APDU:
Data
Status Word
8 bytes IDm + No. of System Codes (n) + System Code List (2n)
SW1, SW2