Identiv uTrust 4711F - Cntless_Nfc_Singleshot; Cntless_Nfc_Loopback

Document Version 1.2
Last revised on
2017-09-26
Page 72 of 92
Reference Manual for uTrust 4701F and uTrust 4711F Readers
6.3.4.22. CNTLESS_NFC_SINGLESHOT
This Escape command is used to switch the device to Single-shot mode.
Input:
Offset
Description
Detailed description
0
0xEC
NFC Single-shot
1
0x01
NFC_DEP supported.
If a value other than 0x01 is given, NFC_DEP is not supported in
the preceding I-Blocks.
Output:
Output buffer
NULL
6.3.4.23. CNTLESS_NFC_LOOPBACK
This Escape command is used to switch the device to Loop-back mode.
Input:
Offset
Description
Detailed description
0
0xED
NFC Loop-back
1
0x01
NFC_DEP supported.
If a value other than 0x01 is given, NFC_DEP is not supported
in the preceding I-Blocks.
Output:
Output buffer
NULL