Identiv uTrust 4711F - Contact_Emv_Singlemode; Contact_Emv_Timermode

Document Version 1.2
Last revised on
2017-09-26
Page 78 of 92
Reference Manual for uTrust 4701F and uTrust 4711F Readers
6.3.5.3. CONTACT_EMV_SINGLEMODE
This Escape command lets the host perform a one-shot EMV Loop-back application as specified in the
EMV Level 1 Testing Requirements document.
Input:
Byte0
Escape code(0x06)
Output:
Output buffer
NULL
6.3.5.4. CONTACT_EMV_TIMERMODE
This Escape command lets the host perform a timer mode EMV Loop-back application as specified in
the EMV Level 1 Testing Requirements document
Input:
The input buffer contains the escape code value.
Byte0
Escape code(0x07)
Output:
Output buffer
NULL