Operation
177
Sensor Doesn’t Charge (cont.)
• During winter, with a constant cloud cover, the Sensor may discharge completely. Watch the battery capacity of the Sensors regularly to
prevent a total discharge. A totally discharged Sensor needs much longer to get fully re-charged and the battery may lost it’s capacity if it’s
left completely drained for a period of time.
• A solar Sensor charger is available as an optional accessory. Contact your iDig Dealer for more information.
• If the unit won’t charge even after some hours under the charger or full sunlight, the unit is broken and needs to be repaired/replaced.
Control Box Screen Looks Weird or has Stripes
• Re-boot the Control Box.
• If the issue still exists, the graphic driver is broken and the Control Box needs to be repaired.
With Slope or Reach Enabled, the Values are Running Without Machine Movement
• The 2D Sensor received a heavy shock, e.g. it got installed on the support plate AFTER system boot.
• Enter the Basic Settings and select Sensor Check. Click on the “2D Tare” button several times.
Without Slope or Reach Enabled, the Values are Running Without Machine Movement
• Check the Unit Lengths of the bucket in the Machine Parameters section.
• Enter the Basic Settings and select Sensor Check. Click on the “2D Tare” button several times.
To Next Page
Loading...