Operation
178
The Laser Catch Doesn’t Get (or can’t be) Confirmed
• The system only validates a laser catch if all Sensors have stabilized within a certain tolerance range.
• Check in the Sensor Check menu if one or more radio sensor values are frozen or the 2D yaw value is “running”. A certain “flickering” is
normal.
• Frozen radio sensor value:
• Re-pair the sensor to the system.
• Change the radio channel.
• Running 2D yaw (rotation) value:
• The 2D Sensor received a heavy shock, e.g. it got clipped onto the suppor plate AFTER system boot.
• Enter the Basic Settings, Sensor Check. Click on “2D Tare” several times.
• Check in the Sensor Check menu if the laser receiver’s reception of the laser beam is normal, or if the beam disappears even if it’s on the
reception field.
• If the laser reception is unsteady:
• Check for beam reflection.
• Check your rotating laser, e.g. via a cross check with the hand held detector.
• Check for a 2
nd
rotating laser close-by on almost the same level.
• Re-pair the Sensor to the system.
• Change the radio channel.
• Check in the Sensor Check the indications on the sensor’s laser cell, e.g. if the system sees a 2
nd
laser beam.
To Next Page
Loading...