4 Denmark I
5 Sweden
6 Italy
7 Spain I
8 Japan
9 Norway
10 Denmark II
11 Spain II
12 Latin
13 Korea
14 Slovenia/Croatia
15 Chinese
[Default] n = 0
28. ESC S (*)
[Name] Select standard mode
[Format] ASCII ESC S
Hex 1B 53
Decimal 27 83
[Description] Switches from page mode to standard mode.
[Details] This command is effective only in page mode.
Data buffered in page mode are cleared.
This command sets the print position to the beginning of the line.
The printing area set by ESC W are initialized.
This command switches the settings for the following commands (in which the
values can be set independently in standard mode and page mode) to those for
standard mode:
① Set right-side character spacing: ESC SP, FS S
② Select default line spacing: ESC 2, ESC 3
The following commands are enabled only to set in standard mode.
① Set printing area in page mode: ESC W
② Select print direction in page mode: ESC T
The following commands are ignored in standard mode.
① Set absolute vertical print position in page mode: GS $
② Set relative vertical print position in page mode: GS \
Standard mode is selected automatically when power is turned on, the printer is
reset, or command ESC @ is used.
[Reference] FF, ESC FF, ESC L
29. ESC T n (*)
[Name] Select print direction in page mode
[Format] ASCII ESC T n
Hex 1B 54 n
Decimal 27 84 n
To Next Page
Loading...
