iDiPOS TP-80 - GS $ nL nH; Set absolute vertical print position in page mode

28
43. GS ! n
[Name] Select character size
[Format] ASCII GS ! n
Hex 1D 21 n
Decimal 29 33 n
[Range] 0

n

255
(1

vertical number of times

8, 1

horizontal number of times

8)
[Description] Selects the character height using bits 0 to 2 and selects the character width using
bits 4 to 7, as follows:
Bit
Off/On Hex Decimal
Function
0~3 Character height selection. See Table 2.
4~7 Character width selection. See Table 1.
Table 1 Table 2
Character Width Selection
Hex Decimal Width
00 0 1(normal)
10 16 2(double-width)
20 32 3
30 48 4
40 64 5
50 80 6
60 96 7
70 112 8
Character Height Selection
Hex Decimal Width
00 0
1(normal)
01 1
2(double-height)
02 2
3
03 3
4
04 4
5
05 5
6
06 6
7
07 7
8
[Details]

This command is all characters (alphanumeric and Kanji) effective except for
HRI characters.

If n is outside of the defined range, this command is ignored.

In standard mode, the vertical direction is the paper feed direction, and the
horizontal direction is perpendicular to the paper feed direction. However,
when character orientation changes in 90

clockwise-rotation mode, the
relationship between vertical and horizontal directions is reversed.