iDiPOS TP-80 - 69.FSSn1 n2

46
k = 72
[Description] Defines user-defined Kanji characters for the character codes specified by c1 and
c2.
[Details] • c1 and c2 indicate character codes for the defined characters. c1 specifies for
the first byte, and c2 for the second byte.
• d indicates the dot data. Set a corresponding bit to 1 to print a dot or to 0 to not
print a dot.
[Default] All spaces.
[Reference] FS C
[
Default
] No defined Kanji
Relation between User-defined Chinese character and data:
69. FS S n1 n2
[Name] Set left- and right-side Kanji character spacing