iDiPOS TP-80 - 66.FS-n; 67.FS.; 68.FS2 c1 c2 d1...dk

45
66. FS - n
[Name] Turn underline mode on/off for Kanji characters
[Format] ASCII FS - n
Hex 1C 2D n
Decimal 28 45 n
[Range] 0 ≤ n ≤ 2, 48 ≤ n ≤ 50
[Description] Turns underline mode for Kanji characters on or off, based on the following values
of n.
n Function
0, 48 Turns off underline mode for Kanji characters
1, 49 Turns on underline mode for Kanji characters (1-dot thick)
2, 50 Turns on underline mode for Kanji characters (2-dot thick)
[Details] • The printer can underline all characters (including right- and left-side character
spacing), but cannot underline the space set by HT and 90° clockwise-rotated
characters.
• After the underline mode for Kanji characters is turned off by setting n to 0,
underline printing is no longer performed, but the previously specified underline
thickness is not changed. The default underline thickness is 1 dot.
• The specified line thickness does not change even when the character size
changes.
• It is possible to turn underline mode on or off using FS !, and the last received
command is effective.
[Default] n = 0
[Reference] FS !
67. FS .
[Name] Cancel Kanji character mode
[Format] ASCII FS .
Hex 1C 2E
Decimal 28 46
[Description] Cancels nKanji character mode.
[Reference] FS &
68. FS 2 c1 c2 d1...dk
[Name] Define user-defined Kanji characters
[Format] ASCII FS 2 c1 c2 d1...dk
Hex 1C 32 c1 c2 d1...dk
Decimal 28 50 c1 c2 d1...dk
c1 = FEH
A1H ≤ c2 ≤ FEH
0 ≤ d ≤ 255